DIV M AL DN 25 ISO-KF NIT

Part Number: 215506

Contact us for availability

Click For Availability Typical lead time 2 week(s)

Variant

Explore the range of variants given below to compare the product

DIV M ISO-KF - Diaphragm Valves

DIV (Diaphragm In-line Valves) are diaphragm sealed in‑line, isolation valves. The construction consists essentially of a flexible elastomeric diaphragm which is sealed onto a lightly polished seat by a screw thread mechanism. The mechanism is isolated from the system by the diaphragm resulting in an extremely rugged and ‘dirty’ system tolerant valve.

Features and Benefits

  • Easy to operate with visual indication of valve open (SP10K to SP25K), Leak tight to better than 10‑6 mbar ls‑1 / 8 x 10‑7 Torr ls‑1, Diaphragm completely isolates mechanism from vacuum system, Extremely rugged and ‘dirty’ system tolerant, Will withstand 9 bar overpressure (SP10K to SP40K) with co-seal.

General Product Information

Connection Outlet Flange DN 25 ISO-KF (NW25)
Connection Inlet Flange DN 25 ISO-KF (NW25)
Leak Rate 1.000 × 10⁻⁷
Power Supply Voltage manual operation
Valve Actuation Method Manual
Weight 0.760
Dimension Comments The dimensions length, width and height try to describe the outer shape of this particular product in its typical orientation when standing on the ground. For valves in particular we recommend checking the detailed dimensions given in 2D drawings in the instruction manual or the 3D shapes given in 3D models.

Material of Construction

Material Body Aluminum
Material Seal NBR (nitrile butadiene rubber)

Performance Data

Leak Rate Across Seat Valve 1.000 × 10⁻⁷
Recommended Pressure Range Max 1.500 × 10⁵

Environmental Conditions

Temperature Ambient Operation Max 40.00
Temperature Ambient Storage Max 40.00
Temperature Ambient Operation Min 5.00
Temperature Ambient Storage Min -10.00

Operation Conditions - Limitations

Temperature Baking Max 60.00